Balboa Heater - M7 - 3.0kW (Plug N' Click)

Works with BP Spa Packs

LID: 20713

Balboa Heater - M7 - 3.0kW (Plug N' Click)

Fits BP Spa Packs

3.0kW

Incoloy Element

2" x 2" Tailpiece

£213.53 Inc VAT

(RRP: £260.40)

SKU: HTR-7463

MPN: 58301

31 In StockSame day dispatch if ordered by 14:00

QTY

Compare Product Ask us a Question

Fast UK Delivery

Next working day from £8.50 Standard from £4.50 or FREE if you spend £60

Fitted with 24" M7 sensor technology to regulate spa water flow and temperature (Click HERE for Details)

Heater gaskets and split nut unions are also included making for easy installation and removal. Solvent weld sockets for 2" pipe. Fixed into place with 2 x mounting studs top and bottom.

The heater comes complete with two M7 sensors, pre mounted at each end of the heater tube ready for connection to the control box.

This Balboa heater assembly is quick to install and allows for easy servicing and troubleshooting, due to the split 2" buttress thread unions with O ring. The union is ready to accept glued 2" pipework.

3KW Version

Always match the heater number to ensure the correct specification, the 3kw can be used with GS500, 500Z, 501, 501Z (3.0KW only), 501SZ, 510, 510S, 510Z, 510SZ, 511SZ, 523DZ, GL2000 mach 3, GL2001 mach 3 systems, it is used in spa including Spaform, Hydrospa, Canadian, Aegean, Catalina, Hydropool, , Marquis Spa, , Leisurite, Leisure Bay, Signature Spas, Hot Tubs Direct.

PLEASE NOTE - This heater assembly is not compatible with BP200 Spa Pack

Model Information

Type	Flow Thru
MPN	58300
Element	Incoloy
Integrated in Spa Pack	Yes
Sensor Type(s)	M7 - Probe
Mount Type	Cilp
Length (includes tails)	495 mm
Plumbing Connection	2.0''

Electrical Info

Power	3.0 kW
Voltage / Hz	230V - 50/60Hz
Amps	11.5-12.0

Element Details

Element Type	Incoloy
Element Length	10" (255mm)
Terminal Spacing	31.75 mm

Compatible Spa Pack

Balboa BP

Downloads & Articles

More Info

Important Information:
Our range of Spa Packs must be installed by a competent individual or tradesman, that is trained within the industry. Spa Packs and other computerised equipment are exempt from our returns policy if they have been opened or installed. If the spa pack is suspected as being faulty, it will need to be returned to us within the warranty period and will then be forwarded to the manufacturer for inspection. If deemed to be faulty, we will replace under warranty. If the board is not at fault or is found to have been damaged due to installation, an additional charge will be required to cover the costs of shipping and return.
*Please ensure this is the correct Spa Pack as this item is non-refundable - If you are unsure, please contact our friendly customer service team for advise & support