Pure-Spa - Spa Chlorine Granules - Available in 1kg or 5 kg
Spa Chlorine Granules are rapid dissolving and are specifically formulated to disinfect spa and hot tub water, they have a minimal effect on the pH value of the water. Spa Stabilised Chlorine Granules are ideal for daily disinfection of the water.
1kg Chlorine Granules - Sodium Dichloroisocyanurate Dihydrate
WHY? Stabilised Chlorine Granules are the most popular method of sanitising spa water.
Your spa needs to be chlorinated at all times. Never use your spa without first testing your spa water.
The ideal Chlorine level is between 3 parts per million (ppm) & 5ppm.
WHEN? Test the Chlorine level in your spa daily and immediately before every use.
HOW? Test the Chlorine level of your spa. If it is below 3ppm then apply as follows:
1. Pre-dissolve the required amount of granules in a clean plastic bucket filled with warm water. Stir the solution until the granules are fully dissolved.
2. Ensure that your spa circulation pump is turned on before slowly pouring the solution directly onto the spa water surface.
3. Continue to run your spa circulation pump for 15 minutes.
4. Re-test your spa water and repeat dosage until the Chlorine reading is between 3ppm and 5 ppm and allow 15 minutes before using your spa.
HOW MUCH? As a general guide to increase a 1500L spa from 0ppm to 4pmm you will need to add at least 12g of Chlorine Granules. A heaped teaspoon holds approximately 8g of Chlorine Granules.
Do NOT mix chemicals
GENERAL PRECAUTIONS Never mix with any other chemicals as a dangerous reaction may occur.
When pre-dissolving add product to water and not vice versa, ensure the bucket is clean, if in doubt rinse before use. Handle spa chemicals carefully, in a well ventilated area, preferably outdoors and always wash hands thoroughly after use. Store chemicals in a secure, cool dry place.