Fi-Clor Spa Water Clarifier Restores clarity to lacklustre water and helps prevent algae, scale and staining. It coagulates fine particles suspended in the water until they are large enough to be trapped in the filter. It is equally effective in spas disinfected with chlorine or bromine.
Instructions
Fi-Clor Spa Water Clarifier can be dosed directly into the spa but should be used only when bathing has ceased. Establish the volume of your spa by referring to the Spa Handbook
Remedial treatment. To treat water that is already cloudy, the dose rate is 65ml Water Clarifier per 1,000 litres (220gall) of spa water.
Preventative treatment. To help prevent cloudy water, dose at the rate of 20ml Water Clarifier per 1,000 litres (220gall) of spa water once every week.
- Dose into the spa and keep the circulation running.
- Bathing may resume after 10 minutes with the circulation on.
- Remove filter cartridge and clean it with Fi-Clor Spa Cartridge Cleaner if water circulation seems to be impaired.
Warning: Do not use together with other products. May release dangerous gases (chlorine).
Precautions: Never mix chemicals, except by dosing into the spa separately and at different times. Never add chemicals to the water when bathers are in the spa. Store in a cool, dry, well ventilated, secure place away from oxidising and reducing agents, eg, petrol, oil, solvents and organic materials; ammonia, fertiliser and nitrogen compounds; strong acids and alkalis. Avoid direct contact with pool chemicals. Should there be skin contact with chemicals, wash thoroughly.
This is now discontinued and very limited stock