HydroQuip Heater Element - 10" - Flo Thru - 4KW - Titanium

Universal Fit For Most Flo Thru Heaters

LID: 19744

TITANIUM

LENGTH 10" / 255MM

STANDARD FIT FOR 15" HEATERS

4KW - 240V

£64.99 Inc VAT

SKU: ELE-5130

MPN: 12-0102F-K

5 In StockSame day dispatch if ordered by 14:00

QTY

Compare Product Ask us a Question

Fast UK Delivery

Next working day from £8.50 Standard from £4.50 or FREE if you spend £60

This is the most common heating element found in hot tubs and spas and easy to replace.
Suitable for heaters from Balboa, Gecko, HydroQuip, Thermocore, Aquatemp, RMF, Spabuilders and Brett Aqualine, but will fit most heater assemblies on hot tubs up to 15" long.
This is a genuine USA made element from high quality, incoloy 800 metal with a titanium coating, offering superior corrosion resistance and making it the highest grade heating element you can buy for you spa.
Comes supplied with new Viton seals and terminal nuts.

Electrical Info

Power	4.0 kW
Voltage / Hz	230V - 50/60Hz

Element Details

Element Type	Titanium
Element Length	10" (255mm)

More Info

A few tips regarding elements

To remove a hot tub heating element push down on both elements and slide them straight out.It's also a good idea to replace the heater tube seals as well.
Do not over tighten the element retaining nuts and the 10mm nuts holding the connections, these don't need a lot of torque.
NEVER run you heater dry, always prime your heater before switching on.
Usually a hot tub will only trip when power is sent to the element.Can be5 seconds after its switched on or after prime mode has ended.
Always try the hot tub without the filter cartridge fitted, always check forforeign objects inside the filter bay.
Withthe power of to the hot tub, disconnect the heaterelement. ISOLATE TERMINALS TO AVOID ELECTRICUTION.Turn the power back on, if the hot tub doesn't trip you have isolated that the fault is the element.
Look for signs of corrosion around the seals in the heatertube, also look for water leaksaround the control pack.