Tecmark Pressure Switch - 4755P

Adjustable PSI

LID: 20614

Tecmark

Adjustable PSI

Replaces Len Gordon 800122

Replacement Part

£30.67 Inc VAT

(RRP: £38.34)

SKU: 6715

31 In StockSame day dispatch if ordered by 14:00

QTY

Compare Product Ask us a Question

Fast UK Delivery

Next working day from £8.50 Standard from £4.50 or FREE if you spend £60

This pressure switch is manufactured by Tecmark and labled with part numbers 4755P. Suitable replacement for Len Gordon 800122. Same as 5756P with less amp rating

These switches convert a pressure signal to an electrical output in response to a change in pressure and movement of an elastomeric diaphragm which opens and closes an electrical circuit based on a set pressure. 3 spade connections allow either a simple on/off configuration or the extra connection point can be used to toggle a dual speed application.
Usually mounted in the heater tube, it can also be found in the plumbing leading to the heater. The unit is extremely easy to replace, but it is advisable to drain the spa to prevent water damage through spraying of water onto the circuit board as this switch may be found inside the control box.

Up to 277vac
16A resistive can be used with a heater for example
4A, 1HP inductive @ 250vac (eg motor/pump)
PSI adjustable
1/8" MPT (Male BSP) thread.

The unit is extremely easy to replace, but it is advisable to drain the spa to prevent water damage through spraying of water onto the circuit board as this switch may be found inside the control box.

More Info

Summary

Up to 277vac
16A resistive can be used with a heater for example
4A, 1HP inductive @ 250vac (eg motor/pump)
PSI adjustable
1/8" MPT (Male BSP) thread.

Important Information:
Our ranges must be installed by a competent individual or tradesman, that is trained within the industry. Spa Packs and other computerised equipment are exempt from our returns policy if they have been opened or installed. If the spa pack is suspected as being faulty, it will need to be returned to us within the warranty period and will then be forwarded to the manufacturer for inspection. If deemed to be faulty, we will replace under warranty. If the board is not at fault or is found to have been damaged due to installation, an additional charge will be required to cover the costs of shipping and return.

Please ensure this is the correct Spa Pack as this item is non-refundable - If you are unsure, please contact our friendly customer service team for advise & support